Solid Waste Management / Treatment

Goldust machine can process all types of vegetable and non-vegetable organic waste. All the waste is shredded into a size of 6 to 9 mm and then deposited into the digester, either directly or through a screw press dewatering system.

When waste is added to GOLDUST, the moisture sensor detects the amount of moisture in the waste and, if it exceeds the desired limit, turns on a heater that is attached to the composting tank. At the same time, a shaft blade starts mixing the waste evenly in accordance with the timing that has been set. The wetness evaporates because of the heater’s heat and is discharged as water vapor through an exhaust system. About 70 to 80 percent of the volume is decreased at this point as the procedure is finished. These unique micro-organisms become active and begin their decomposition process for the leftover volume of trash when the temperature reaches a specific wanted level.

In this step, we decrease the volume even further and get a volume reduction of between 85 and 90%. There is no sound of refuse being crushed throughout the entire process, and the shaft is only there to combine the waste uniformly. Everything that was done was mechanical and biological to create a natural simulation. Our unique microorganisms can survive in high temperatures, as well as highly corrosive or saline environments.